A laser cut car key is a high-security key with a groove milled into the centre of the blade, rather than cuts along its edges. It is also called a sidewinder key. It needs specialist cutting equipment, and on almost every modern car it also needs its chip programming to the car. If you have lost one, need a spare, or have been quoted a tow to a dealer, a mobile auto locksmith can cut and programme the key at your car. We do this across Essex and Hertfordshire, usually within 30 to 60 minutes of arriving.
TL;DR
- A laser cut key, also known as a sidewinder or high-security key, has a winding track milled into the middle of the blade. A hardware-shop cutter cannot copy it.
- Cutting the blade is only half the job. The key's transponder chip normally has to be programmed to your car as well.
- You do not need to tow the car anywhere. A mobile locksmith with the right machine and diagnostic tools can do both jobs on your driveway or at the roadside.
- Our Standard Key starts at £120 and our Remote Key at £150. Programming and lockout work also start at £120.
- Have your registration, proof you own the vehicle and your photo ID ready before the visit.
Table of Contents
- What is a laser cut car key?
- Why car makers moved to high-security keys
- Why you cannot just get one cut at a key kiosk
- Cutting is not enough: the transponder chip
- Spare key or all keys lost?
- What you need to have ready
- How much does a laser cut key cost?
- Vans and commercial vehicles
- Why mobile beats the dealer for most people
- Our view
- Get your laser cut key made today
- FAQ
- Sources
What is a laser cut car key?
Most people picture a key with teeth along one or both edges. A laser cut key looks different. It has a flatter, thicker blade, and a wavy channel runs along the middle of it. Locksmith trade press describes laser-cut keys as also called sidewinder, high-security and worm-cut keys, after the trough-like tracks in the blade.

Despite the name, a laser does not usually do the cutting. The same trade article explains that the groove is made by notching out the solid metal blade with what looks like a tiny drill bit. The "laser" label is a nickname that stuck because the finished cut is so clean and precise.
You will find these keys on many mainstream cars and vans, not only premium models. If your key blade has a groove down the middle rather than jagged edges, it is almost certainly a laser cut key. If you are unsure, a photo of the blade and the car's registration is usually enough for us to tell.
Why car makers moved to high-security keys
The change was a response to theft. The same Locksmith Ledger article says laser-cut keys arrived in the 1990s as an extra physical security measure after widespread vehicle thefts in the 1980s, first as an option on premium vehicles. The introduction of laser-cut keys is part of the wider story of how car security moved from simple mechanical locks to layered protection.
The advantage is built into how the key works:
- They are hard to copy by hand. The trade article says impressioning with a file is not possible, and reading the key by eye is much harder than with an edge-cut key.
- The locks are more complex. It describes the locks these keys operate as much more robust and complicated than edge-cut ones.
- They usually work with an immobiliser. It also notes that it is now rare to find a laser-cut key on a vehicle without a transponder system.
That last point matters when you need a replacement. The blade is only part of what the car checks.
Why you cannot just get one cut at a key kiosk
A standard cutter clamps a key by its edge and traces the teeth onto a blank. A laser cut key has no teeth to trace. The cut sits inside the blade, so it needs a machine that mills the centre track to the right depth and position, with the correct blank for your make and model.
There are two practical consequences:
- Cutting a copy from your existing key is possible but not simple. The machine has to read the original accurately. A worn or bent key gives a poor copy.
- Cutting by code is often a better route. If the key code is available for your vehicle, the blade can be cut from the code rather than copied from a worn original. Our guide to key cutting by code for cars and vans explains when this works.
A correctly cut blade will turn in the door lock and the ignition on many cars. That does not mean the car will start, which brings us to the chip.
Cutting is not enough: the transponder chip
Inside the plastic head of most laser cut keys is a small transponder chip. When you turn the key or press the start button, the car's immobiliser reads the chip. If the code does not match one the car knows, the engine will not run, however perfectly the blade is cut.
So a replacement laser cut key normally involves two separate jobs:
- Cutting the blade so it fits the locks.
- Programming the key so the car's immobiliser accepts it.
This is why "the key turns but the car won't start" is such a common complaint after a key has been cut elsewhere. If that has happened to you, our article on sidewinder key cutting and mobile help when the car still won't start covers what to do next.
Programming needs access to the car's security system through diagnostic equipment. Our technicians are SERMI-certified, and our vans carry the diagnostic tools to do this at your location. You can read more about what to expect when a locksmith programmes car keys and about adding a key to your car's immobiliser.
Spare key or all keys lost?
The situation you are in changes how the job goes.
You still have one working key
This is the easier and usually cheaper case. A spare can be cut and programmed alongside your existing key. It is also the best time to act: once you have lost your last key, the job gets more involved. If you only have one key, getting a spare made now is worth doing.
You have lost every key
An all keys lost job means a new key has to be made without an original to work from. The blade is cut from a code or by other means, and the new key is programmed to the car's immobiliser. We cover the full sequence in 8 technician steps for all keys lost programming in one visit. We do all keys lost replacements on site, so the car does not need to be towed.
Your key was stolen
If a key has been stolen, the worry is that someone could use it. We offer stolen key deletion and reprogramming, which removes the missing key from the car's system so it no longer works, and programs your new key.
You are locked out
If the key is locked inside, or lost somewhere you cannot reach, we offer emergency lockout and non-destructive access, which means getting in without damaging the door or lock. See our car lockout service for details.
What you need to have ready
A locksmith replacing a security key should be confident the car is yours. Have these to hand:
- The registration number, plus the make, model and approximate year.
- Proof of ownership, such as the V5C logbook, or other documents showing you are the keeper.
- Photo ID, such as a driving licence or passport, with an address that matches your paperwork where possible.
- Any existing key, even a damaged one or one with a broken head. It can help identify the correct blank and chip.
- Access to the car. If it is on a drive or in a car park, tell us exactly where.
These checks protect you. A locksmith who makes a key for any car without asking questions is a risk to every other driver too.
How much does a laser cut key cost?
The price depends on the make and model, the type of key (standard or remote), whether you have a working key, and whether the job is an emergency. Dealer prices also bundle in collection, ordering and, often, recovery of the car to the workshop.
Our published prices are:
| Service | Price |
|---|---|
| Standard Key | from £120 |
| Remote Key | from £150 |
| Key Programming | from £120 |
| Car lockout | from £120 |
| Emergency callout | from £120 |
| Vehicle lock and ignition repair | from £120 |
Prices are one-off per job. Key cutting, remote programming, all keys lost replacement, stolen key deletion and key fob repair are quoted for your vehicle. Send us your registration and tell us what happened, and we will quote before we come. Because we come to you, you also avoid a recovery truck bill and a day without the car.
Our Ford key page shows how standard and remote key pricing is set out for one popular make.

Vans and commercial vehicles
Vans are among the vehicles that use high-security keys, and a missing key can stop a working day. A mobile visit is built for this: we come to your depot, yard or job site, so the van does not have to be recovered. We handle van key replacement for all major van makes. If you run several vans, having spare keys programmed in advance means one lost key does not stop a vehicle.
Why mobile beats the dealer for most people
The usual route is a tow to a main dealer, an order for a key blank, and a wait. With a laser cut key, the problem is rarely the blade. It is getting equipment, security access and a skilled person to the car. Our vans are set up with the diagnostic tools to do that on site.
- No tow. The work happens where the car is.
- Time. We typically complete jobs within 30 to 60 minutes.
- Credentials. Our technicians are licensed, insured and SERMI-certified.
- Coverage. We work in Harlow, Chelmsford, Epping, Brentwood, Billericay, Bishop's Stortford, Braintree, Great Dunmow, Loughton, Ongar, Sawbridgeworth, Stansted, Ware, Writtle and the surrounding areas.
If you are weighing up whether a locksmith can really do this, most car keys can be made on site, and our guide runs through five checks.
Our view
Most people who ring us about a laser cut key think they have a cutting problem. Usually the real issue is that the car also has to accept the key, and that needs the right diagnostic equipment and certified access to the vehicle's security data.
That is why we built the service around the van. We bring the equipment to you, so a lost key or a stolen key does not also mean a tow, a day off work and a wait for a part.
If you have one key left, make a spare now. It is the simplest and cheapest way to avoid an all keys lost situation, and we can do it at your home or workplace.
James
Get your laser cut key made today
If you are in Essex or Hertfordshire, we can come to you with the equipment to cut and programme a high-security key on site. Tell us the make, model and what has happened, and we will give you a price. Start with our key programming service or see everything we do on our services page.

Not sure which service you need? Our auto locksmith quiz points you in the right direction.
FAQ
Is a laser cut key the same as a sidewinder or high-security key?
Yes. The terms describe the same style of key, with a groove milled into the centre of the blade. Trade sources list sidewinder, high-security and worm-cut as other names for it.
Can a laser cut key be copied by hand?
No. Filing a copy from impressions is not possible with this style of key, and reading the cuts by eye is much harder than with an edge-cut key. It needs a milling machine and the right blank, which is why a specialist cuts it.
Will a new laser cut key start my car straight away?
Only once its transponder chip has been programmed to the car. A correctly cut blade will open the door, but the immobiliser must also recognise the chip. We cut and programme the key in the same visit.
Can you make a laser cut key if I have lost all my keys?
Yes. We handle all keys lost replacements at your location in Essex and Hertfordshire. Bring your proof of ownership and photo ID, and we will confirm the price for your vehicle before we start.
Sources
- Shifting to Laser-Cut Keys, Locksmith Ledger
- 3 Checks to Authenticate Supercar Parts, SuperCars.Parts
