Yes. A specialist auto locksmith can programme car keys and key fobs, usually at your car, without a tow to a dealership. Most jobs on the vehicles we see take 30 to 60 minutes. Programming means pairing a new key's chip and remote functions with your car's immobiliser. Cutting the blade is only part of the job. Below you'll find how the process works, what it costs in the UK, what you need to have ready and what to check before you book.
TL;DR
- A locksmith can programme transponder keys, remote keys and many keyless fobs on site, even if you have lost every key.
- Our key programming starts from £120, and a remote key from £150. Final cost depends on your make, model and key type.
- Have the registration, make, model and proof of ownership and ID ready. Your V5C logbook and photo ID are the usual documents.
- For brands covered by the UK SERMI scheme, ask whether the locksmith is SERMI certified. We are.
- A mobile visit saves the cost and wait of recovery to a dealer.
Table of Contents
- What "programming" a car key actually means
- Do locksmiths programme key fobs?
- Can a locksmith programme a key if I have lost every key?
- How a mobile programming visit works
- What to have ready before the locksmith arrives
- How much does it cost to have a car key programmed in the UK?
- How long does it take?
- Which jobs need extra care?
- What if the key will not programme?
- SERMI: what to ask a locksmith before booking
- Why a locksmith suits van and fleet keys too
- Perspective: what we see on the road
- Book a mobile key programming visit
- FAQ
- Sources
What "programming" a car key actually means
Almost every car built in the last 25 years or so has an immobiliser. The key carries a small transponder chip, and the car will only start if the chip sends the right code. A new key that has been cut but not programmed may open the door and turn in the ignition, yet the engine will not start.
Programming is the electronic step. A locksmith plugs diagnostic equipment into the car's OBD port, usually under the dashboard, and talks to the immobiliser and engine control unit. The new key is then registered so the car recognises it. If the key has remote buttons, those are paired too.

The ALA Keycare FAQs make the same point. Your VIN can give the manufacturer's key specification so a blank can be cut. For most modern vehicles that is only part of the process. Electronic programming, immobiliser pairing and sometimes a replacement transponder chip are still needed, along with proof of ownership and identity checks.
If you want to see how diagnostic work on a vehicle goes in general, what a car diagnostic involves is a clear starting point. Key programming uses the same kind of connection to the car's electronics, but with software built for security systems.
Do locksmiths programme key fobs?
They do. The word "fob" covers several things, and the answer differs slightly for each:
| Key type | What it is | Can a mobile locksmith programme it? |
|---|---|---|
| Transponder key | Metal blade with a chip in the head, no buttons | Yes, cut and programmed on site |
| Remote key (flip key) | Blade plus lock and unlock buttons | Yes, blade cut, chip and remote functions programmed |
| Keyless or smart fob | Proximity fob for push-button start | Often yes, depending on make and model |
| Fob with a damaged case or buttons | Working electronics, worn shell | Often repaired or the case replaced, no new key needed |
On the keyless side, makes and models vary in how their security systems are accessed. We cover this in our guide to keyless fob programming in the UK, and if you have lost a smart key entirely, our piece on replacing a lost smart key without a tow explains the steps.
If your fob works but the case has cracked, you may not need a new key at all. Our page on replacing a car key case on site covers when a new shell is enough.
Can a locksmith programme a key if I have lost every key?
Yes, in most cases. This is called an all keys lost job, and it is the situation most people are in when they search for this. Confused.com's guide notes that a locksmith or dealership should be able to cut and programme a new key without the original.
The difference from adding a spare is that there is no working key to authorise the new one. The locksmith has to access the immobiliser directly, and for some vehicles also to cut a blade from the lock or VIN data. If your car has stopped working because the key was stolen, there is a second step: deleting the old key from the car's memory so it can no longer start the engine. We offer that as stolen key deletion and reprogramming.
Our longer guides cover both scenarios: what to do after losing your car keys and how to add a key to your car's immobiliser.
How a mobile programming visit works
The process is straightforward when the locksmith comes to you.
- You call and give the vehicle details. Make, model, year and registration let us tell you on the phone whether we can programme it and what the job involves.
- We confirm the price and arrival time. We cover Harlow, Chelmsford, Brentwood, Epping, Bishop's Stortford, Braintree and the surrounding parts of Essex and Hertfordshire.
- On arrival, we check ownership and identity. This is a legitimate protection for you, not paperwork for its own sake.
- We cut the key if needed. If you have lost every key, the blade is produced on the van.
- We connect to the car and programme. The new key is registered, remote functions are paired, and any lost or stolen key can be removed from the system.
- We test everything. Door locks, remote buttons, ignition and engine start are all checked before we leave.
Because the work is done where the car is parked, you do not pay for recovery and you do not leave the car at a garage. Direct Line's advice on lost keys confirms that many auto locksmiths offer mobile services if you have the necessary documents and details, including make and model, registration, VIN, personal ID and your location postcode.
For a closer look at how on-site replacement works across our area, see our page on onsite car key replacement in Essex and Hertfordshire.
What to have ready before the locksmith arrives
A few minutes of preparation makes the visit shorter.
- Vehicle registration, make, model and approximate year. This tells the locksmith which equipment and key blanks to bring.
- Proof of ownership. The V5C logbook is the standard document. A purchase invoice or a finance agreement can help if the logbook is not to hand.
- Photo ID. A driving licence or passport. The name should match the paperwork.
- The VIN. It is on the V5C and visible through the windscreen at the base, on the driver's side.
- Any working key you still have. A spare speeds up the job and makes it simpler.
- Clear access to the car. If it is in a car park or on a drive, tell us the exact postcode and any access codes.
If the car is locked and you cannot get in, tell us at the start. Our car lockout service uses non-destructive entry, so we can open the car first and then go on to the key work.
How much does it cost to have a car key programmed in the UK?
Price depends on the key type, the vehicle and whether you have lost all keys. These are the figures from our own price list, which we read from our site on 1 October 2026:
| Service | Our price |
|---|---|
| Key programming | from £120 |
| Standard key | from £120 |
| Remote key | from £150 |
| Emergency callout fee | from £120 |
Other jobs, such as all keys lost replacement, key fob repair, stolen key deletion and van key replacement, are priced after we know your vehicle. Call us with the registration and we will tell you.
For context, published guides show a wide range across the UK. Autotrader puts a manual key replacement at around £60 to £100, and a remote key anywhere from £300 to £1,000 depending on how much reprogramming is involved. Confused.com, citing Checkatrade figures, gives around £160 for a standard mechanical key, around £320 for a remote key and around £280 for a keyless entry key, with luxury models such as a Range Rover Sport remote key at around £595.
The ALA guide adds that a reputable auto locksmith is often the cheaper route compared with a main dealership, because cutting and programming on site reduces labour, recovery and transport costs.
The practical lesson: cost goes up with the complexity of the security system, not just the name on the key. A quote that comes from a make, model and year is far more reliable than a figure from a general guide.

How long does it take?
On most vehicles we work on, a mobile job takes around 30 to 60 minutes once we are on site. A locksmith's own estimate on a complex or rare model may be longer, and we will say so when you call.
Compare that with the alternative. ALA notes that dealerships may take longer, especially when a new key must be ordered from the manufacturer, and that in some cases replacement could take a day or two. If the car cannot be driven, it also has to be recovered first.
Which jobs need extra care?
Most cars and vans can be handled on site. Some systems need more than standard equipment. Manufacturer-protected smart key systems on certain models can call for factory-level authorisation, and some older, bespoke or heavily immobiliser-locked vehicles benefit from specialist knowledge rather than general kit. That is exactly why it pays to give your registration when you call: we can tell you the right route for your car before anyone drives out.
If your vehicle needs something more than a standard visit, we explain what is involved and how to get it done. Our article on whether a locksmith can make a car key goes through five checks to run before you book.
What if the key will not programme?
This happens for a handful of reasons, and most are fixable:
- The wrong key or chip type. Keys that look the same can use different chips. A locksmith identifies the correct one from the car's data.
- A low or flat car battery. Programming needs steady power. A weak battery can interrupt the process.
- A cheap online key. Keys bought online are sometimes the wrong frequency or a locked chip that cannot be paired. Show the locksmith before you buy, or let us supply the key.
- A faulty immobiliser or ignition. If the lock or ignition barrel is worn, the key may turn but the car will not respond. We handle lock and ignition repair as well.
- Security-locked systems. Some brands lock access to the module, which needs the right approved tooling.
If a key will not programme for you at home, it is worth calling a mobile locksmith rather than repeating the attempt. Repeated failed attempts on some systems can trigger a security lock-out that takes longer to clear.
SERMI: what to ask a locksmith before booking
SERMI is the scheme behind secure access to manufacturers' vehicle security data. Garage Wire reports that SERMI covers key programming, immobiliser coding and security module access, that the certificate lasts five years with two audits (one unannounced), and that it can be revoked. The same article notes there is no mandatory licensing for locksmiths in the UK, so certification is one of the clearest signs that a business has been checked.
When you ring around, ask these questions:
- Are you SERMI certified, and can I see the certificate?
- Can you programme my make, model and year?
- What is the total price, including callout, key and programming?
- Will you check ownership and ID before starting?
- Are you insured?
All our technicians are licensed, insured and SERMI certified. Our blog explains what SERMI certification means for auto locksmiths in more detail.
Why a locksmith suits van and fleet keys too
If you drive a van for work, a day without keys is a day without income. Taking it to a dealer means recovery, a wait and possibly a lost working day. A mobile visit puts the work at your depot, yard or roadside. We handle van key replacement and spare keys for commercial vehicles, and it is worth having a spare programmed before you lose the only one. See our key cutting by code guide for what is possible for cars and vans.
Perspective: what we see on the road
Most people who call us think programming is a dealership-only job. It is not. A well-equipped van carries diagnostic tools that do the same job on your drive, in a car park or at the roadside.
The best moment to think about programming is before you lose the last key. Adding a spare while you still have a working one is quicker and simpler than an all keys lost job. If a key has already gone missing, or been stolen, we can programme a new one and delete the old one from the car so it can no longer start the engine.
We are licensed, insured and SERMI certified, and we work on modern, complex security systems every week. Give us the registration, and we will tell you straight away what the job involves and what it will cost.
James
Book a mobile key programming visit
If you are in Essex or Hertfordshire and need a key programmed, we come to you. Our key programming service starts from £120, and remote keys start from £150. Call with your registration, make and model and we will confirm what is needed, the price and when we can arrive. Our technicians are licensed, insured and SERMI certified, and our vans carry the diagnostic equipment to do the work on the spot.

If you are locked out or have lost all your keys, our emergency service has a callout fee from £120. You can see everything we offer on our main services page.
FAQ
Can a locksmith programme car keys?
Yes. An auto locksmith with the right diagnostic equipment can programme transponder keys, remote keys and many keyless fobs. Modern vehicles often need a specialist with experience of transponder and keyless systems, so give your make, model and registration when you call.
Do locksmiths programme key fobs?
They do. A locksmith can pair a new fob with your car's immobiliser, and can often repair or replace a damaged fob case. Whether a particular keyless system can be done on site depends on the make and model, which we can confirm by phone.
Can a mobile locksmith programme a key at my car?
Yes. The equipment is carried in the van and connects to the car's diagnostic port, so no tow is needed. Have the registration, VIN, proof of ownership and photo ID ready, along with the exact postcode of the car.
How much does it cost to programme a car key?
Our key programming starts from £120 and remote keys from £150, with the final price depending on your vehicle and key type. Published UK guides show higher figures for remote and keyless keys, and more again for luxury makes. Ring us with your registration for a clear quote.
What if I have lost every key?
A locksmith can still cut and programme a new key without an original. You will need proof of ownership and ID, and the job takes longer than adding a spare. We can also delete a stolen key from the car so it cannot be used to start it.
Sources
- Replacing lost or stolen car keys - FAQs | ALA
- What To Do If You Lose Your Car Keys | Direct Line
- Seven steps to get a car key replacement | Autotrader
- What to do if you've lost your car keys | Confused.com
- SERMI cost us £1,800 and four months | Garage Wire
- Car Diagnostic Near Me: What It Is and How to Find One
