← Back to blog

Key Fob Reprogramming: What It Involves and What It Costs

November 19, 2026
Key Fob Reprogramming: What It Involves and What It Costs

Key fob reprogramming means re-pairing a fob with your car's immobiliser and locking system so the car recognises it again. If your fob has stopped working after a new battery, if you have bought a replacement, or if you have lost a fob, a mobile locksmith with the right diagnostic equipment can do it at your door. In Essex and Hertfordshire, our SERMI-certified technicians come to you, and our Key Programming work starts from £120.

Autokeymaker
Get Your Key Fob Working Again
Autokeymaker provides on-site key programming and replacement in Essex and Hertfordshire, typically within 30 to 60 minutes.
Visit

TL;DR

  • Reprogramming changes which keys the car trusts. It does not repair a cracked board, worn buttons or corroded contacts.
  • Try a fresh battery first. If the fob is still dead, or you have a new or replacement fob, it needs pairing to the car.
  • Smart keys, all-keys-lost situations and cars that need a security PIN or manufacturer authorisation are jobs for a professional.
  • If a fob is lost or stolen, the old one can be removed from the car's memory when a new one is programmed, so it stops working.
  • Our Key Programming starts from £120 and our Remote Key from £150, done on-site, typically within 30 to 60 minutes.

Table of Contents

What key fob reprogramming actually does

A modern car does not simply check that a key fits. It checks that the key sends the right coded signal. The fob holds a small chip, and the car's immobiliser (the anti-theft system that stops the engine starting without a recognised key) keeps a list of the codes it accepts. Separately, the remote buttons send a radio signal that the central locking listens for.

Reprogramming rewrites that relationship. A technician connects a diagnostic tool to the car, usually through the OBD port under the dashboard, and tells the car's computer which keys to accept. Depending on the make, the job might:

  • add a new or spare fob to the list;
  • replace a lost fob with a new one;
  • re-pair a working fob after the car's electronics have been reset or repaired;
  • remove a lost or stolen fob from the list so it can no longer start the car.

The key point is that this is a software job. A fob with a snapped casing, a broken circuit board or buttons worn through will not be fixed by programming alone. That needs a repair or a replacement fob, which is then programmed. We handle both under our key fob repair and replacement work.

Does your fob need reprogramming or just a battery?

Before you book anything, take five minutes to rule out the simple causes. Most fobs run on a small coin cell, and a weak one gives the classic symptoms: you have to press the button several times, you need to stand next to the car, or the remote works one day and not the next. A fresh battery of the exact type printed inside the case is the first thing to try, and it costs a few pounds.

If the battery is new and the fob still does nothing, reprogramming is likely the answer in these situations:

  • You have a new or second-hand fob. A replacement fob arrives blank or paired to another car. It must be cut (if it has a blade) and paired to yours.
  • The fob stopped working after a battery change. Some fobs lose their pairing if the battery is out for a long time, though many do not.
  • The car's battery went flat or was replaced, or the car had electrical work. Occasionally the car forgets its keys or the remote function needs re-syncing.
  • The remote locks the doors but the car will not start. The remote function and the immobiliser chip are separate. The chip may need programming.
  • You want a spare. An extra key needs adding to the car's memory in the same way.

A fob that has been dropped in water or physically damaged may need a new shell or a new fob rather than a re-pair. If you are unsure which applies, describe the symptoms to us and we will tell you what the job involves before we travel.

If you want a fuller picture of how different keys behave, our guide to car key types and what each costs to replace covers basic blade keys, transponder keys, remote keys and smart keys.

Can you reprogram a key fob yourself?

Some cars do have a built-in procedure, usually a sequence of turning the ignition on and off and pressing a button, that pairs a remote. It is not illegal to do this to your own car: a feature in Family Handyman quotes locksmiths saying there are no legal or security issues with programming your own fobs. The same article also cautions that getting it wrong can disable electrical features or cause problems with the car's engine computer.

It also notes that on some Nissan and Infiniti proximity-key systems, the procedure begins by erasing all the existing keys. If the process is interrupted or the new key fails to register, the car can be left with no keys in memory at all. That is a stranded car, not a minor inconvenience.

This is why we recommend leaving it to a technician in most cases, particularly when:

  • the car has a smart key or push-button start;
  • there is no onboard programming mode for your model;
  • you have lost every key;
  • the car needs a security PIN or an online manufacturer authorisation to accept a new key.

Our technicians arrive with diagnostic equipment, and we are SERMI-certified, the scheme that lets approved businesses access vehicle security data. That means a locksmith who can read the car's security system directly rather than guessing at a sequence from a forum post. If a job turns out to be more than a simple re-pair, you are already with the person who can finish it.

The principle is the same in other systems that rely on pairing. Tyre pressure sensors, for example, must be matched to the car after replacement, and TPMS sensor programming rules show how the right tool, the right steps and a relearn procedure all matter. A key fob is no different: it works only once the car has accepted it.

What happens if you lose a key fob

Losing a fob is stressful mostly because of what could happen to the lost one. The good news is that a replacement fob can be programmed and the missing fob deleted from the car's memory, so anyone who found it could no longer start the car with it. We do this as part of our stolen key deletion and reprogramming service, and it is worth asking for whenever a key has gone missing in a place where someone else could pick it up.

If you still have one working fob, a spare is a straightforward programming job. If you have lost every key, it is an all keys lost job. The car cannot be started to authorise a new key in the usual way, so the technician has to work with the car's security system directly. This is where a mobile locksmith is particularly useful: the car does not have to be towed to a dealer, because we come to the car. Our guide to replacing a lost smart key without a tow explains how that works.

Proof of ownership

A reputable supplier will not cut or programme a key for a car without checking you are entitled to it. Auto Express says a legitimate key supplier will ask for photo ID showing your address, the vehicle identification number (VIN), the registration number and the V5C logbook. Have these to hand and the visit goes faster. If the logbook is not with you, tell us when you call so we can explain what else may be needed.

Will insurance pay?

Some comprehensive policies cover replacement keys, lock replacement and reprogramming of the immobiliser after a theft. Uswitch points out that claims normally carry your standard excess, so a £250 replacement against a £300 excess is not worth claiming, and a claim can affect your No Claims Discount and your renewal price. Check your policy wording before deciding. We have more detail in our guide to whether UK insurance covers lost car keys.

How much does key fob reprogramming cost?

The price depends on two things: the type of key and the make of car. Reprogramming a fob you already have is the cheaper end of the job. Supplying a new fob and programming it costs more because the hardware is part of the price.

For the UK as a whole, Uswitch's lost-keys guide, published in June 2026, gives these typical replacement costs, programming and labour included:

Key typeTypical UK replacement cost
Basic metal key£10 to £50
Remote locking key£150 to £250
Transponder key£200 to £300
Smart key or keyless fob£250 to £500+

The same guide notes that some premium smart keys can cost over £1,000 once programming and labour are added. That is a reminder that the make and model matter more than the word "fob".

Our published starting prices, as listed on our site, are:

ServicePrice
Key Programmingfrom £120
Standard Keyfrom £120
Remote Keyfrom £150
Emergency calloutfrom £120

Other jobs, such as all keys lost replacements, stolen key deletion and key fob repair, do not have a published price because they depend on the vehicle. Tell us the make, model and year when you call and we will explain what applies to your car.

What is included in a mobile price is worth comparing with the alternatives. A trip to a main dealer typically means arranging transport for the car, waiting for the key to be ordered and booking a workshop slot. On-site programming removes the towing and the waiting from the equation. The money you save is often in the logistics, not just the key.

What to have ready before the technician arrives

A little preparation turns a 60-minute job into a shorter one.

  1. The registration number and the VIN. The VIN is on the V5C logbook and at the base of the windscreen.
  2. The V5C logbook and photo ID with your address. As above, these prove the car is yours.
  3. Every key you still have. Even a worn or broken one helps, because a working key makes the job simpler and a spare can be added alongside.
  4. The make, model, year and key type. Is it a flip key, a remote with a blade, a push-button smart key? A photo of the fob from both sides helps.
  5. A location where the technician can reach the car. For all keys lost jobs the car does not have to move. We work from our van wherever it is parked, in the areas we cover across Essex and Hertfordshire.

If the car is locked and the key is inside or lost, tell us when you call. Our non-destructive entry and lockout service gets you into the car without damage, and the programming can follow in the same visit.

Can a used fob be reprogrammed for another car?

Often it can, but not always, and it is the question that causes the most wasted money. A second-hand fob may be locked to its original vehicle, or it may look identical to yours but carry a different chip or radio frequency. Part numbers and the VIN are what confirm compatibility, not appearance. Buying a fob online before checking this can leave you with a fob that cannot be paired to your car at all.

Checks that determine whether a used fob fits

The simplest route is to let us supply the correct fob for your vehicle and programme it in one visit. If you already have a fob you want us to look at, give us the make and model and we can say whether it is suitable for your car.

Why a mobile locksmith for fob programming

Why a mobile locksmith for fob programming

Car keys have changed from pieces of metal into security devices. A fob has to satisfy the car's immobiliser, and the car's manufacturer controls the data that makes this possible. The practical consequence is that the right equipment and the right access matter far more than the speed of cutting a blade.

It is a lot to ask of a driver who just wants to open the car and get to work. That is the problem we built our service around: bring the equipment to the driver, do the job at the kerb and leave the car ready to use.

Our view

We have one rule for fob jobs: the car should not need to move. Every time a car goes on a recovery lorry to a workshop, the driver pays for the lorry, loses a day and waits for a slot. Our vans carry the diagnostic equipment that lets us do dealership-level work on-site, typically within 30 to 60 minutes.

We believe the right fob job is also a safe one. Our technicians are licensed, insured and SERMI-certified, because a key is access to a car and the person programming it should be accountable.

That is why we would rather you call us than try a sequence of button presses you found online on a car with a smart key. Reprogramming is a short job in the right hands. We make it short.

James

Book fob reprogramming in Essex or Hertfordshire

We programme, repair and replace fobs for cars and vans across Harlow, Chelmsford, Epping, Brentwood, Billericay, Bishop's Stortford, Braintree, Loughton, Ware and the villages around them. Our Key Programming service starts from £120 and a Remote Key from £150. For commercial drivers, our van key replacement work gets a working vehicle back on the road without a trip to a dealer.

Autokeymaker

Tell us the make, model and year, what the fob is doing and where the vehicle is, and we will tell you what the job involves. You can see everything we do on our services page.

FAQ

Can I reprogram my key fob myself?

Some cars have a built-in pairing routine, and doing it on your own car is not against the law. However, smart keys, all-keys-lost situations and cars that need a PIN or manufacturer authorisation need professional equipment, and a mistake can leave the car with no keys in memory. We recommend booking a technician for those.

How much will it cost to reprogram a key fob?

Our Key Programming starts from £120, and a Remote Key from £150. The final price depends on the make, the model and whether you need a new fob supplied. Tell us your vehicle when you call and we will explain what applies.

Is it possible to reprogram a used key fob?

Sometimes. A used fob must match your car's chip and frequency, and it may be locked to its previous vehicle. Check the part number against your VIN or let us supply and programme the right fob for you.

What if I have lost my key fob?

A replacement can be programmed to your car and the lost fob removed from the car's memory so it stops working. If you have lost every key, this is an all keys lost job, which we carry out on-site. Have your photo ID, the V5C logbook and the registration number ready.

How long does it take?

Our on-site jobs typically take 30 to 60 minutes. Complex or all-keys-lost jobs on some vehicles may take longer, and we will tell you if so when we have looked at the car.

Sources